{"General Data":{"Accuracy":"< 0.1 % span (DC, RTD); 0.2 % span (or 1 \u00b0C) + CJ failure","Configuration":"Using free Windows software, TTA Set Software","Power consumption":"< 3.5 W","Step response time":"50 ms...1 sec (RTD, mV inputs), 110 ms...1 sec (V, mA inputs)","Temperature coefficient":"< 0.1 % \/ K (DC, RTD); < 0.1 % FSR \/ K + CJ error 0.07 \u00b0C\/K (thermocouples)","Voltage supply":"18...264 V AC\/DC"},"Probability Of Failure":{"MTTF":"138\u00a0Years"},"Approvals":{"Approvals":"CE, CULUS, DNV GL","ROHS":"Conform","UL File Number Search":"E141197"},"Dimensions And Weights":{"Length":"100\u00a0mm","Length (inches)":"3.937\u00a0inch","Width":"45\u00a0mm","Width (inches)":"1.772\u00a0inch","Depth":"112.4\u00a0mm","Depth (inches)":"4.425\u00a0inch","Net weight":"274\u00a0g"},"Output (Digital)":{"Alarm function":"Top and bottom limit values, window range, Over-temperature, Alarm mode: delay, switch on or switch on\/off, Holding function can be activated, Delayed 0...4200 s","Number of digital outputs":"2","Type":"2 x 1 CO contact (hard gold-plated), Process alarms (4x) with hysteresis, with alarm delay (configurable) 0\u2026180 s","Max. switching voltage, AC":"250\u00a0V"},"Connection Data":{"Type of connection":"Tension-clamp connection","Stripping length, rated connection":"7\u00a0mm","Clamping range, rated connection":"2.5\u00a0mm\u00b2","Clamping range, min.":"0.5\u00a0mm\u00b2","Clamping range, max.":"2.5\u00a0mm\u00b2"},"Tender Specification Sheets":{"Long specification":"Universal measurement isolating converters and trip amplifiers; can be configured with a PCUniversal measurement isolating converters and trip amplifiers in 45 mm width with external supply for voltage and sensors, for transmitting and isolating analogue DC current-20 to 50 mA, voltages -200 to 500 mV\/ -20 to 50 V, 2-\/3-\/-4-wire RTD, resistors,thermocouples according to IEC 584 and frequencies up to 100 kHz( 2- \/ 3-wire sensors).Two switching outputs (CO contact) for alarmsand analogue DC voltages (-10 to +10 V) and current outputs (0 to 20 mA) are available on the output side.The component can be configured with a PC using the proprietary TTA-Set software.Add-on housing for TS35 DIN rail installation Dimensions: L\/W\/H 100\/ 45\/ 112.4 mm tension-clamp connection\/nominal cross-section1.5 mm2Protection degree: IP20 input-20 to 50 mA -200 to 500 mV \/ -10 to +10 V PT100, PT1000, Ni100, Ni1000, Cu10\/25\/50\/100 2-\/3-\/4-wire resistance 10 Ohm to 5 kOhm\/ Potentiometer100 Ohm to 100 kOhm thermocouple types B, E, J, K, N, R, S, T frequencies 2 Hz to 100 kHz (2-\/3-wire sensors) sensor supply 24 VDC \/ 22 mA outputanalogue0 to 20 mA \/ adjustable -10 to +10 V\/ adjustable relay output\/ Alarm 2 CO contacts, hard gold-plated 250 VAC @ 3 A \/ 30 VDC @ 2A load resistance <700 Ohm\/ current\/ >10 kOhm\/ voltageTransmission errorStep response time< 0,1 % v. E. (DC, RTD)10...90 % < 0,2 % + CJ Fehler (TC)Auxiliary power 18...264 V AC\/DCPower loss approx. 3.5 WAmbient temperature range -25 \u00b0C...+70 \u00b0C< 50 ms...1 s einstellbar< 50 ms...1 s einstellbar< 50 ms...1 s einstellbarIsolation EN 50178 secure 3-way isolation up to 6 kV of all circuits against each otherTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC\/DC at overvoltage category III and pollution degree 2Approvals cULus, GLType WAZ6 TTA","Short specification":"Universal measurement isolating converters and trip amplifiers; can be configured with PCUniversal measurement isolating converters and trip amplifiers in 45 mm width with external supply for voltage and sensors, for transmitting and isolating analogue DC current\u00a0-20 to 50 mA, voltages -200 to 500 mV\/ -20 to 50 V, 2-\/3-\/-4-wire RTD, resistors,\u00a0thermocouples according to IEC 584 and frequencies up to 100 kHz( 2- \/ 3-wire sensors).Two switching outputs (CO contacts) are available on the output side for alarms.Analogue DC voltage (-10...+10 V) and current outputs (0...20 mA) are available on the output side.The component can be configured with a PC using the proprietary\u00a0TTA-Set software."},"Input":{"Number of inputs":"1","Sensor":"Thermocouples: B, E, J, K, L, N, R, S, T (IEC 60584), PT100, PT1000, (EN 60571) Ni100, Ni1000, (JIS1604), Cu10, Cu25, Cu50, Cu100 (DIN 43760) 2-\/3-\/4-wire","Sensor supply":"24 V DC \/ 22 mA","Input voltage":"-200...500 mV (min. 4 mV span), -20...50 V DC (min. 0.5 V span)","Input current":"-20...+50 mA (min. interval 0.4 mA)","Input frequency":"2 Hz\u2026100 kHz","Resistance":"10 \u03a9\u20265 k\u03a9","Potentiometer":"100 \u03a9...100 k\u03a9"},"Output (Analogue)":{"Load resistance current":"< 700 \u03a9","Load resistance voltage":"> 10 k\u03a9 @ 0...10 V \/ > 20 k\u03a9 @ -10...+10 V","Output current":"adjustable between 0 and 20 mA (min. span of 5 mA)","Output voltage":"adjustable between -10...+10 V (min. span 2.5 V)","Signal output":"direct or inverted","Transmit function":"Linear, x1\/2, x3\/2, x5\/2 or user-defined curve (101 points)"},"Classifications":{"ETIM 6.0":"EC002653","ETIM 7.0":"EC002653","eClass 9.0":"27-21-01-20","eClass 9.1":"27-21-01-90","eClass 10.0":"27-21-01-20","UNSPSC":"30-21-18-01"},"Product Information":{"Product information":"WAS\/WAZ6 TTA is a universal signal converter and trip amplifier that can be configured on the PC. Combines the functions of isolation, transmission, linearisation and trip amplification in a single module.These exceptional characteristics and outstanding configurability combine to make the TTA truly unique.\u00a0The TTA functions with stability and precision under a wide range of voltages and ambient temperatures. It is compatible with all standard sensor types.\u00a0 Universal input signals: temperature signals such as resistance thermometer, thermocouple, potentiometer, frequency transmitter, DC voltage signals and current signalsLoop-powered or passive inputWide-range power supply: 18 \u2013 264 V AC\/DCUser-defined linearizationInputs and outputs can be configured on PCCombined analogue and relay outputAmbient temperature range: -40 \u00b0C \u202670 \u00b0CThe CBX200 USB interface is used to connect to the PC. The WAS\/WAZ6 TTA is also offered as an option with ATEX Zone 2 and UL C1D2 approvals."},"Environmental Product Compliance":{"REACH SVHC":"Lead 7439-92-1"},"Insulation Coordination":{"Clearance & creepage distances":"\u2265 5.5 mm (1 mm input\/output)","EMC standards":"EN 55011, EN 61000-6","Impulse withstand voltage":"6 kV","Insulation voltage":"2.5 kV","Pollution severity":"2","Rated voltage":"300 V","Surge voltage category":"III"},"Temperatures":{"Humidity":"5...95 %, no condensation","Operating temperature, max.":"70\u00a0\u00b0C","Operating temperature, min.":"-40\u00a0\u00b0C","Storage temperature, max.":"85\u00a0\u00b0C","Storage temperature, min.":"-40\u00a0\u00b0C","Operating temperature":"-40 \u00b0C...70 \u00b0C","Storage temperature":"-40 \u00b0C...85 \u00b0C"},"Ratings Iecex\/Atex\/Cul":{"Certificate no. (cULus)":"E141197"}}

Mfr Model # 8939680000
Item #WDM-8939680000

WEIDMULLER - WEIDMULLER

WAZ6 TTA

Downloads